NovoNotes Black Friday 2026! Up to 60% Off

SnapClip Pro

Peaks and Density Dialed In

Launch sale 30% off$98$68.60Until Nov 30

SnapClip Pro refines the transparent clipping of SnapClip, already used by more than 20,000 producers, and adds Inflate: a legendary loudness enhancer born from a British digital console that brings density and presence.

Limiter vs. clipper

Both control peaks to raise loudness, but they work differently, and that difference shapes how your track ends up sounding.

Limiter
Threshold

Transients lose impact

Limiter

Turns down the audio around the peak

Pros

  • Little distortion and little change in tone

Cons

  • Punch and groove tend to weaken
  • The overall sound tends to flatten
Clipper
Threshold

The core of the attack stays solid

Clipper

Shaves off only the peaks

Pros

  • Punch and groove tend to survive
  • Added harmonics add clarity

Cons

  • Clipping too hard causes distortion
  • Some clippers are prone to aliasing

Two ways to finish a track

A. Clipper only

Hip-Hop / EDM / Drum Bus

Master track

EQ↓SnapClip Pro

The clipper sits last on the master. It delivers a powerful sound while keeping the punch of the original mix. Ideal for music driven by beats and groove.

B. With a limiter

Pop / Rock / Acoustic

Master track

EQ↓SnapClip Pro↓Limiter

Balanced peak control that clips before the limiter. It keeps the limiter from flattening the attack, balancing the original tone and punch. Ideal for band sounds and music centered on acoustic instruments.

SnapClip Pro features

/ 01

A high-grade, bit-transparent clipper

Two thresholds on the large waveform view let you set three zones visually: hard clip, soft clip and clean.

Audio passing through the clean zone at the bottom keeps the original signal exactly, without a single bit of change (in Linear Phase mode).

Careful DSP design and meticulous implementation deliver extremely transparent, accurate clipping.

/ 02

Inflate adds density and presence

SnapClip Pro integrates the algorithm of Inflate, a legendary loudness enhancer born from a British digital console. It naturally lifts density and RMS and adds harmonics.

Because it keeps the peak ceiling you set for clipping, it adds presence without raising the peaks.

SnapClip Pro's Inflate also supports modern anti-aliasing such as oversampling and ADAA, adding density more cleanly than the original implementation. Turn oversampling and ADAA off for a classic texture.

/ 03

Uncompromising oversampling and ADAA

Up to 64x oversampling, plus ADAA (Anti-Derivative Antialiasing), which drastically reduces aliasing noise.

Switch between Linear Phase mode with no phase rotation and Minimum Phase mode with near-zero latency, for the right processing in everything from mastering to beat making.

/ 04

Pro monitoring for accurate comparisons

Bypass with Loudness Match lets you compare only the change in tone, without being fooled by loudness differences.

Delta listening lets you monitor only the peaks that were shaved off, so you can fine-tune by ear.

/ 05

A GUI and meters built for modern workflows

Alongside Peak / RMS meters, it includes the LUFS meter and gain reduction meter essential for mastering.

Right-click Output Gain to instantly match a target LUFS or the input loudness.

Four steps: shave the peaks, restore the density

STEP 1

Set the range with the two handles

Use the two handles on the waveform to set the hard clip, soft clip and clean zones. The amount actually clipped is shown as red and yellow lines along the top of the waveform.

STEP 2

Hear only what you removed with delta listening

Press the Delta button to hear only the part that was clipped off. If you can clearly hear the instruments, you are clipping too much.

STEP 3

Restore density with Inflate

Inflate adds density, harmonics and presence.

STEP 4

Compare with the original using loudness-matched bypass

Press the Bypass button to compare the tone with the original at the same loudness. Adjust Inflate while you listen.

Try it on your own tracks

The trial version includes every feature with no time limit. Noise is added to the audio for 2 seconds every 60 seconds.

Hear the difference for yourself

Player controls

Peak normalized
Toggle SnapClip On/Off to compare the change in loudness
Loudness match
Listen for the transparency of the processing and any change in attack or tone

Final stage on the master

The main style: SnapClip Pro alone as the final stage on the master. Use Loudness match to hear how transparently it handles peaks without dulling sharp attacks, and Peak normalized to check how much louder the mix gets. Ideal for modern pop, hip-hop, electronic music and any track where punch and power should come first.

Electronic.wav

0:00 / 0:00
SnapClip On
Loudness match

With a limiter

Balanced peak control, with SnapClip inserted right before the limiter. The SnapClip Off audio already has the limiter on it, so both versions are fairly loud. Listen for how the drum hits and the groove come forward more clearly when you turn SnapClip on. Ideal for pop, rock, anime songs and any track where the instruments' natural nuance and sense of space matter.

Funk Session.wav

0:00 / 0:00
SnapClip On
Loudness match

Punch and density on the drum bus

Shaving off only the peaks, without killing the transients (the force of the attack), creates a punchy beat that comes forward. Inflate then adds density and presence for a thick, full sound.

Acoustic Drums.wav

0:00 / 0:00
SnapClip On
Loudness match

Body and presence for vocals and bass

Combining soft clipping with Inflate adds density and harmonics. The peaks stay where they are, and the part gains solid presence and body that won't get buried in the mix.

Electric Bass.wav

0:00 / 0:00
SnapClip On
Loudness match

What beta testers say

4.7
25 ratings
★5
19
★4
5
★3
1
★2
0
★1
0

The average of all 25 beta testers who allowed us to publish their review.

Language
Anonymous
2026/11/15
OSx4で驚くほどCPU負荷が軽い。いつもの使い方「音が壊れるまで下げてから壊れないとこまで戻す」という使い方をすると削りすぎになるくらい綺麗。インフレーターが100%にしてもどっしり太い。GRメーターが見やすい。
Max (Producer)
2026/11/12
Love the clean layout & very easy to understand meters & visuals
Vvot
2026/11/11
It cuts peaks while preserving texture and avoiding degradation better than any other clipper I own. The soft clip allows for finer adjustments than StandardClip.
ヨッシャ!!E.J.R(作曲家)
2026/11/06
操作が直観的でわかりやすい。 各ボタンに日本語の説明があるため、何をどう弄れば良いか迷わない。 プリセットが豊富。ソースに合わせてプリセットを選んであとは微調整するだけで満足いく仕上がりになる。
s.asagiri
2026/11/06
軽くてとても使いやすいです。ピークのチクチクをガンガン刈り取っても音が壊れないのが最高です!
Aximus
2026/11/04
Despite the fact that a clipper is a simple device and that there are many clipper plugins, there are very few truly good ones. And this clipper is one of those good clipers. Mainly thanks to the ability to set a "lookahead" style function (limiter in strict celling) to get crimp and warm sound without excessive distortion and grit. Combined with the inflate knob (which sounds similar to a famous inflator) this clipper sounds really cool on drums, bass, and the master bus (without using a subsequent limiter). The result is a punchy, sharp, and noble sound. In hard clipper mode it works well in parallel with drums and on synthesizers. Also, by simultaneously using hard/soft clip and inflate, you can restore the presence effect to the vocals and bring them closer to the listener on the virtual stage. It’s also nice that there’s a delta mod and automatic volume adjustment. The preseta are unremarkable, but I liked that all the main knobs are located right in the window with the opened preset, so you can quickly adjust it to suit your needs. Overall, it’s a very good clipper — I’ve definitely added it to my collection.
See all reviews (25)

Survey respondents received a discount coupon for the full version, regardless of their rating.

SnapClip Pro and SnapClip Standard

Your SnapClip Pro license key also activates SnapClip Standard. We recommend SnapClip Pro for detailed work on buses and the master, and SnapClip Standard for inserting on many tracks with zero latency.

SnapClip ProSnapClip Standard

Main window

Recommended use

Mastering, buses, multi-mic sources

Track inserts, live and recording

Latency (48 kHz)

Linear phase: 0–86 samples Minimum phase: 0–30 samples

0 samples

Max oversampling

64x

16x

Phase mode

Linear phase / Minimum phase

Minimum phase

Bit-exact clean zone

✓ (linear phase only)

—

Loudness enhancer (Inflate)

✓

—

Loudness match / Delta

✓

—

Loudness meter

✓

—

Automatic parameter adjustment

Input gain and output gain

Snap Adjust

SnapClip Standard is also sold on its own ($15.20). Buy SnapClip Standard

SnapClip Pro technical specifications
  • Up to 64x oversampling and ADAA
  • Switchable Linear Phase / Minimum Phase
  • Curve control with Curve Shape (TIGHT to ROUND)
  • 64-bit floating-point audio processing
  • Strict Ceiling (Limiter / Hard Clip / Off)
  • Phase-compensated Mix control (Dry/Wet)
  • ITU-R BS.1770 compliant LUFS meter
  • Automatic gain adjustment
  • GUI available in six languages
  • Formats: VST3 / AU / AAX on macOS 12 or later, VST3 on Windows 11
  • CPU: Intel i5 or later, Apple Silicon (native)
  • Supported hosts: Pro Tools 2026, Logic Pro 13, Cubase 16, Fender Studio Pro 8, Ableton Live 12, REAPER 7, Bitwig Studio 6, FL Studio 2026

FAQ

If I buy SnapClip Pro, can I also use SnapClip Standard?
Yes. Download SnapClip Standard with its own installer and activate it with the same license key as SnapClip Pro.
What is the difference between Minimum Phase and Linear Phase?
Linear Phase preserves phase, so the unclipped part matches the original signal bit for bit. In exchange, it adds latency. Minimum Phase has very little latency, with phase rotation in the high frequencies. It suits situations where latency matters, such as tracking and live use.
What are the system requirements?
VST3 / AU / AAX on macOS 12 or later, and VST3 on Windows 11. CPU: Intel i5 or later, or Apple Silicon. Apple Silicon is natively supported. Supported hosts: Pro Tools 2026, Logic Pro 13, Cubase 16, Fender Studio Pro 8, Ableton Live 12, REAPER 7, Bitwig Studio 6, FL Studio 2026.

Launch price until Nov 30

SnapClip Pro

Limited-Time Offer$98$68.60

The same license key also activates SnapClip Standard.

macOS 12+ VST3 / AU / AAX (Apple Silicon Native)

Windows 11 VST3

SnapClip Pro interface